Handbook of Molded Part Shrinkage and Warpage, 2nd Edition

Handbook of Molded Part Shrinkage and Warpage, 2nd Edition

Handbook of Molded Part Shrinkage and Warpage, 2nd Edition

eBook
Author(s):Jerry Fischer
Format: Original PDF
Published year: 2012
Publisher: Elsevier
Language: English
Pages: 292
ISBN: 9781455730575, 9781455725977

Summary

How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer's Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single 'correct' shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with.

Similar books

© 2026 VitalBooks. All rights reserved.